Command Manual - PoE
Quidway S6500 Series Ethernet Switches
Chapter 2 PoE PSU Supervision Configuration
Commands
Huawei Technologies Proprietary
2-2
Table 2-1 Description on the fields of the display poe-power ac-input state
command
Field Description
Normal: The AC input is normal.
Lack Phrase: The PSU is idle.
Under Limit: The AC input voltage is lower than
the lower threshold.
Upper Limit: The AC input voltage is higher than
the upper threshold.
Fuse Broken: The fuse is blown.
PSU 1 AC Input State:
(AC input state of PoE PSU 1)
Switch Off: The switch is off.
2.1.2 display poe-power alarm
Syntax
display poe-power alarm
View
Any view
Parameter
None
Description
Use the display poe-power alarm command to display the detailed alarm information
about the external PoE PSUs.
Example
# Display the detailed alarm information about the external PoE PSUs.
<Quidway> display poe-power alarm
PSU alarm detail:
Number of PSUs : 3
PSU 1 : Absent
PSU 2 : NORMAL Normal.
PSU 3 : Absent