Huawei Quidway S6500 Series Command Manual

Command Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches Chapter 2 IGMP Snooping Configuration Commands
Huawei Technologies Proprietary
2-6
[Quidway] igmp-snooping max-response-time 12
2.1.7 igmp-snooping router-aging-time
Syntax
igmp-snooping router-aging-time seconds
undo igmp-snooping router-aging-time
View
System view
Parameter
seconds: Specifies the router port aging time, ranging from 1 to 1000 measured in
seconds; By default, 105
Description
Using igmp-snooping router-aging-time command, you can configure the router port
aging time of IGMP Snooping. Using undo igmp-snooping router-aging-time
command, you can restore the default value.
The port here refers to the Ethernet switch port connected to the router. The Layer-2
Ethernet switch receives general query packets from the router via this port. The timer
should be set to about 2.5 times of the general query period of the router.
For the related command, see igmp-snooping, igmp-snooping
max-response-time.
Example
# Set the aging time of the IGMP Snooping router port to 300 seconds.
[Quidway] igmp-snooping router-aging-time 300
2.1.8 reset igmp-snooping statistics
Syntax
reset igmp-snooping statistics
View
User view
Parameter
None

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English