Huawei Quidway S6500 Series Command Manual

Command Manual - Network Protocol
Quidway S6500 Series Ethernet Switches Chapter 7 IPX Configuration Commands
Huawei Technologies Proprietary
7-8
Parameter
None
Description
Using the ipx netbios-propagation command, you can enable the current VLAN
interface to forward type 20 broadcast packets. Using the undo ipx
netbios-propagation command, you can disable the current VLAN interface to
forward type 20 broadcast packets.
By default, type 20 broadcast packets are not forwarded.
Example
# Allow the current interface to forward type 20 broadcast packets.
[Quidway-Vlan-interface1] ipx netbios-propagation
7.1.8 ipx network
Syntax
ipx network network-number
undo ipx network
View
VLAN interface view
Parameter
network-number: Hexadecimal IPX network number in the range 0x1 to 0xFFFFFFFD.
The leading 0s can be omitted when you input a network number.
Description
Using the ipx network command, you can assign an IPX network number to the
VLAN interface. Using the undo ipx network command, you can delete the IPX
network number of the VLAN interface.
By default, no network number is assigned to VLAN interfaces; therefore, IPX is
disabled on all the VLAN interfaces even after it is enabled globally.
Example
# Assign the network number 675 to VLAN interface 1.
[Quidway-Vlan-interface1] ipx network 675

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English