Huawei Quidway S6500 Series Command Manual

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 5 SNMP Configuration Commands
Huawei Technologies Proprietary
5-20
SNMP engineID (for authentication) is required when configuring remote user for an
agent. This command will not be effective without engineID configured.
For V1 and V2C, this command will add a new community name. For V3, it will add a
new user for an SNMP group.
Example
# Add a user wang for hello (an SNMP group), configures to authenticate with MD5 and
sets authentication password as pass.
[Quidway] snmp-agent usm-user v3 wang hello authentication-mode md5 pass
5.1.23 undo snmp-agent
Syntax
undo snmp-agent
View
System view
Parameter
none
Description
Using undo snmp-agent command, you can disable all versions of SNMP running on
the server.
Perform any command of snmp-agent will enable SNMP Agent.
Example
# Disable the running SNMP agents of all SNMP versions.
[Quidway] undo snmp-agent

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English