Huawei Quidway S6500 Series Command Manual

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 4 System Maintenance Commands
Huawei Technologies Proprietary
4-21
chinese,english: Language used in log file.
Description
Using info-center loghost command, you can configure the IP address of the
info-center loghost to send information to it. Using undo info-center loghost
command, you can cancel output to info-center loghost.
By default, Ethernet switches do not output information to info-center loghost.
This command takes effect only after the system logging is enabled.
For the related commands, see info-center enable,display info-center.
Example
# Configure to send log information to the UNIX workstation at 202.38.160.1.
[Quidway] info-center loghost 202.38.160.1
4.5.11 info-center loghost source
Syntax
info-center loghost source interface-name
undo info-center loghost source
View
System view
Parameter
source interface-name: set source address of the packets sent to loghost as the
address of the interface specified by the interface-name. Normally, the interface can be
VLAN interface, NULL interface or Loopback interface.
Description
Using info-center loghost source command, you can set source address of the
packets sent to loghost as the address of the interface specified by the interface-name.
Using undo info-center loghost source command, you can cancel the setting source
address of the packets sent to loghost.
This command takes effect only after the system logging is enabled.
For the related commands, see info-center enable, display info-center.
Example
# Set source address of the packets sent to loghost as the address of the VLAN
interface 1.
[Quidway] info-center loghost source vlan-interface 1

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English