Huawei Quidway S6500 Series Command Manual

Command Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches Chapter 2 Qos Command
Huawei Technologies Proprietary
2-22
 Note:
Different interface cards of S6500 Series Switches support different QoS functions. You
can use “?” to query the supported QoS configurations after entering different QoS
views.
Example
# Enter QoS view and query the QoS configuration supported by the interface card.
[Quidway-GigabitEthernet7/0/1] qos
[Quidway-qosb-GigabitEthernet7/0/1] ?
Qosb view commands:
catch catch
display Display current system information
line-rate Limit the rate of the outbound packets of the interface
packet-filter Filter packets based on acl
ping Ping function
quit Exit from current command view
reset Reset operation
tracert Trace route function
traffic-limit Limit the rate of the packets
traffic-priority Specify new priority of the packets
traffic-redirect Redirect the packets
traffic-statistic Count the packets
undo Cancel current setting
2.1.19 qos cos-local-precedence-map
Syntax
qos cos-local-precedence-map cos0-map-local-prec cos1-map-local-prec
cos2-map-local-prec cos3-map-local-prec cos4-map-local-prec cos5-map-local-prec
cos6-map-local-prec cos7-map-local-prec
undo qos cos-local-precedence-map
View
System view

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English