Huawei Quidway S6500 Series - Page 478

Command Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches Chapter 2 Qos Command
Huawei Technologies Proprietary
2-23
Parameter
cos0-map-local-prec: The mapping value from COS 0 to local-prec, ranging from 0 to 7.
cos1-map-local-prec: The mapping value from COS 1 to local-prec, ranging from 0 to 7.
cos2-map-local-prec: The mapping value from COS 2 to local-prec, ranging from 0 to 7.
cos3-map-local-prec: The mapping value from COS 3 to local-prec, ranging from 0 to 7.
cos4-map-local-prec: The mapping value from COS 4 to local-prec, ranging from 0 to 7.
cos5-map-local-prec: The mapping value from COS 5 to local-prec, ranging from 0 to 7.
cos6-map-local-prec: The mapping value from COS 6 to local-prec, ranging from 0 to 7.
cos7-map-local-prec: The mapping value from COS 7 to local-prec, ranging from 0 to 7.
Description
Using the qos cos-local-precedence-map command, you can configure “COS
→Local-precedence” mapping table. Using the undo qos cos-local-precedence-map
command, you can restore the default value.
By default, the system provides default “COS →Local-precedence” mapping table.
Table 2-9 Default “COS →Local-precedence” mapping table
COS value Local precedence
0 2
1 0
2 1
3 3
4 4
5 5
6 6
7 7
Example
# Configure the “COS →Local-precedence” mapping table.
[Quidway] qos cos-local-precedence-map 0 1 2 3 4 5 6 7
After configuration, the mapping table is as follows: