Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 7 Route Capacity Configuration Commands
Huawei Technologies Proprietary
7-5
For the related commands, see memory auto-establish enable, memory { safety |
limit }, display memory limit.
Example
# Disable memory resume of the current Ethernet switch and recover connections of all
the protocols automatically.
[Quidway] memory auto-establish disable
7.1.5 memory auto-establish enable
Syntax
memory auto-establish enable
View
System view
Parameter
None
Description
Using memory auto-establish enable command, the routing protocol connection that
is forcibly disconnected to recover automatically when the idle memory of the Ethernet
switch reaches this value.
By default, when the idle memory of the Ethernet switch recovers to a safety value,
connections of all the routing protocols will always recover (when the idle memory of
the Ethernet switch reduces to a lower limit, the connection will be disconnected
forcibly).
For the related commands, see memory auto-establish disable, memory { safety |
limit }, display memory limit.
Example
# Enable memory resume of the current Ethernet switch and recover connections of all
the protocols automatically.
[Quidway] memory auto-establish enable

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English