Command Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches Chapter 2 IGMP Snooping Configuration Commands
Huawei Technologies Proprietary
2-3
2.1.3 display igmp-snooping statistics
Syntax
display igmp-snooping statistics
View
Any view
Parameter
None
Description
Using display igmp-snooping statistics command, you can view the statistics
information on IGMP Snooping.
This command displays the statistics information about IGMP Snooping of Ethernet
switch. It displays the information such as number of received general IGMP query
packets, received IGMP specific query packets, received IGMP Version 1 and Version 2
report packets, received IGMP leave packets and error packets, and sent IGMP
specific query packets.
For the related command, see
igmp-snooping.
Example
# Display statistics information about IGMP Snooping.
<Quidway> display igmp-snooping statistics
Received IGMP general query packet(s) number:0.
Received IGMP specific query packet(s) number:0.
Received IGMP V1 report packet(s) number:0.
Received IGMP V2 report packet(s) number:0.
Received IGMP leave packet(s) number:0.
Received error IGMP packet(s) number:0.
Sent IGMP specific query packet(s) number:0.
2.1.4 igmp-snooping
Syntax
igmp-snooping { enable | disable }
View
System view, VLAN view
To Next Page
Loading...
Need help?
General
