Huawei Quidway S6500 Series - Display Multicast Routing-Table

Command Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches Chapter 3 Multicast Common Configuration Commands
Huawei Technologies Proprietary
3-4
Table 3-1 Description of information generated by the command display multicast
forwarding-table
Field Description
Multicast Forwarding Cache Table Multicast forwarding cache table
Total 2 entries Total number of entries
00002 Sequence number of entries
(4.4.4.4, 224.2.149.17) (s,g)
iif Vlan-interface1, 1 oifs
Multicast forwarding cache table has an
incoming interface Vlan-interface 1 and one
outgoing interface
List of outgoing interface:
01: Vlan-interface2
List of outgoing interface has an outgoing
interface Vlan-interface 2
Matched 236 pkts(3267 bytes),
Wrong If 0 pkts
Forwarded 236 pkts(3267
bytes)
236 matched packets (3267 bytes); 0
matched packets means wrong; 233
forwarded packets (3267 bytes)
Matched 2 entries 2 matched entries
3.1.5 display multicast routing-table
Syntax
display multicast routing-table [ group-address [ mask { mask | mask-length } ] |
source-address [ mask { mask | mask-length } ] | incoming-interface { interface-type
interface-number | register } ]*
View
Any view
Parameter
group-address: Multicast group address, used to specify a multicast group and display
the corresponding routing table information of the group. The value ranges from
224.0.0.0 to 239.255.255.255.
source-address: Unicast IP address of the multicast source.
incoming-interface: Incoming interface of the multicast route entry.
register: Register interface of PIM-SM.