Huawei Quidway S6500 Series Command Manual

Command Manual - Reliability
Quidway S6500 Series Ethernet Switches Chapter 1 VRRP Configuration Commands
Huawei Technologies Proprietary
1-9
Parameter
virtual-router-ID: VRRP virtual router ID, ranging from 1 to 255.
adver-interval: VRRP packet interval of the master in the virtual router, in seconds,
ranging from 1 to 255; By default, the value is 1 second.
Description
Use the vrrp vrid timer advertise command to set the VRRP packet interval of the
master in the virtual router.
Use the undo vrrp vrid timer advertise command to restore to the default value.
You are required to set the identical timer value for the switches in the same virtual
router to avoid improper configuration.
Example
# Configure the master to transmit VRRP packets every 15 seconds.
[Quidway-vlan-interface2] vrrp vrid 1 timer advertise 15
1.1.10 vrrp vrid track
Syntax
vrrp vrid virtual-router-ID track interface-type interface-num [ reduced
value-reduced ]
undo vrrp vrid virtual-router-ID track interface-type interface-num [ reduced
value-reduced ]
View
VLAN interface view,Ethernet interface view
Parameter
virtual-router-ID: VRRP virtual router ID, ranging from 1 to 255.
interface-type interface-num: Tracked interface.
value-reduced: Reduced value of priority, ranging from 1 to 255; By default, the
reduced value of priority is 10.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English