Huawei Quidway S6500 Series - Igmp Host-Join; Igmp Host-Join Port

Command Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches Chapter 4 IGMP Configuration Commands
Huawei Technologies Proprietary
4-7
4.1.8 igmp host-join
Syntax
igmp host-join group-address
undo igmp host-join group-address
View
LoopBack interface view
Parameter
group-address: Multicast address of the multicast group that an interface will join.
Description
Using igmp host-join command, you can enable a LoopBack interface of an ethernet
switch to join a multicast group. Using undo igmp host-join command, you can
disable the configuration.
By default, a LoopBack interface does not join any multicast group.
For the related command, see igmp host-join port, igmp host-join vlan and igmp
group-policy.
Example
# Add LoopBack 0 to the multicast group at 225.0.0.1.
[Quidway-LoopBack0] igmp host-join 225.0.0.1
4.1.9 igmp host-join port
Syntax
igmp host-join group-address port { interface_type interface_ num | interface_name }
[ to { interface_type interface_ num | interface_name } ]
undo igmp host-join group-address port { interface_type interface_ num |
interface_name } [ to { interface_type interface_ num | interface_name } ]
View
interface view
Parameter
group-address: Multicast address of the multicast group that an interface will join.
port: Specifies the port in the VLAN interface.