Huawei Quidway S6500 Series Command Manual

Command Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches Chapter 2 Qos Command
Huawei Technologies Proprietary
2-3
2.1.4 display qos-interface all
Syntax
display qos-interface [ interface-name | interface-type interface-num ] all
View
Any view
Parameter
interface-name | interface-type interface-num: Interfaces of the switch, for detailed
description, please refer to Command Manual – Port.
Description
Using the display qos-interface all command, you can view QoS setting information
of all interfaces. If you do not input interface parameters, this command will display all
QoS setting information of the switch, including traffic policing, rate limit at interface, etc;
if you input interface parameters, this command will display QoS setting information of
specified interfaces, including traffic policing, rate limit at interfaces, etc.
Example
# Display all the configurations of QoS parameters.
<Quidway> display qos-interface all
GigabitEthernet5/0/1: traffic-limit
Inbound:
Matches: acl 2000 rule 0 running
Target rate: 4 Mbps
GigabitEthernet5/0/1:traffic-priority
Outbound:
Matches: acl std1 rule 0 running
Priority action: dscp ef
GigabitEthernet5/0/1: traffic-red
Outbound:
Matches: acl r1 rule 0 running
Queue length of start random discarding: 64
Queue length of stop random discarding: 128
Max probability of discarding: 20

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English