Huawei Quidway S6500 Series - Page 459

Command Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches Chapter 2 Qos Command
Huawei Technologies Proprietary
2-4
GigabitEthernet5/0/1:traffic-statistic
Inbound:
Matches: acl std1 rule 0 running
0 byte
0 packet
Outbound:
Matches: acl std1 rule 1 running
0 byte
0 packet
GigabitEthernet5/0/2: traffic-red
Outbound:
Matches: acl r1 rule 0 running
Queue length of start random discarding: 64
Queue length of stop random discarding: 128
Max probability of discarding: 20
GigabitEthernet5/0/2: traffic-bandwidth
Outbound:
Matches: acl r1 rule 0 running
Minimum guaranteed bandwidth: 64
Maximum available bandwidth: 128
Bandwidth weight: 100
Table 2-1 Field description of this command
Fielde Explanation
GigabitEthernet5/0/1: traffic-limit
Inbound:
Matches: acl 2000 rule 0 running
Target rate: 4 Mbps
Traffic monitoring configuration:
“inbound”means this configuration is
effective to packets received by
interfaces.
“ Matches: acl 2000 rule 0 running
Burst size: 64 Kbps” means that 4 Mbps
is the maximum rate of packets that
match with subrule0 of ACL1.
GigabitEthernet5/0/1:traffic-priority
Outbound:
Matches: acl std1 rule 0 running
Priority action: dscp ef
Priority mark:
“Outbound” means that this configuration
is effective to packets sent by interfaces.
“ Matches: acl std1 rule 0 running
Priority action: dscp ef “means that the
DSCP priority mark of the packet that
match with ACL std1 ‘s subrule0 is “ef”.