Huawei Quidway S6500 Series Command Manual

Command Manual - Security
Quidway S6500 Series Ethernet Switches Chapter 2 AAA Configuration Commands
Huawei Technologies Proprietary
2-43
Parameter
minutes: Quiet time interval, ranging from 1 to 255, in minutes. The default value is 5.
Description
Use the timer quiet command to set the quiet time interval after which the primary and
secondary RADIUS servers switch over.
Use the undo timer quiet command to set the quiet time interval to its default value.
The functions of the quiet time interval are as follows:
z The switch sends RADIUS packets to the primary RADIUS server.
z If the switch affirms that the primary server does not respond, it then sends
RADIUS packets to the secondary RADIUS server.
z After each quiet time interval, the switch sets the status of the primary RADIUS
server to active, and sends RADIUS packets to it next time.
Example
# Set the quiet time interval of the RADIUS scheme “huawei” to 3 minutes.
[Quidway] radius scheme huawei
[Quidway-radius-huawei] timer quiet 3
2.2.27 timer realtime-accounting
Syntax
timer realtime-accounting minutes
undo timer realtime-accounting
View
RADIUS scheme view
Parameter
minutes: Real-time accounting interval, ranging from 3 to 60 and measured in minutes.
By default, the value is 12. It must be a multiple of 3.
Description
Using timer realtime-accounting command, you can configure the real-time
accounting interval. Using undo timer realtime-accounting command, you can
restore the default interval.
To implement real-time accounting, it is necessary to set a real-time accounting interval.
After the attribute is set, NAS will transmit the accounting information of online users to
the RADIUS server regularly.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English