Huawei Quidway S6500 Series - Chapter 2 HA Configuration Commands; HA Configuration Commands; Display Switchover State; Slave Auto-Update Config

Command Manual - Reliability
Quidway S6500 Series Ethernet Switches Chapter 2 HA Configuration Commands
Huawei Technologies Proprietary
2-1
Chapter 2 HA Configuration Commands
2.1 HA Configuration Commands
2.1.1 display switchover state
Syntax
display switchover state [ slot-id ]
View
Any view
Parameter
slot-id: Slot number of master/slave board.
Description
Use the display switchover state command to display the backup status of
master/slave board.
This command displays the backup state of master/slave board according to the
specified slot number. If the slot-id is not specified, the status of master board will be
displayed.
Example
# Display the status of master board.
<Quidway> display switchover state
HA FSM State(master): Slave is absent.
2.1.2 slave auto-update config
Syntax
slave auto-update config
undo slave auto-update config