Huawei Quidway S6500 Series - Display Dhcp-Server Interface Vlan-Interface

Command Manual - Network Protocol
Quidway S6500 Series Ethernet Switches Chapter 5 DHCP Configuration Commands
Huawei Technologies Proprietary
5-9
Field Description
DHCP_INFORM messages
Number of INFORM packets received by
DHCP relay
DHCP_RELEASE messages
Number of RELEASE packets received by
DHCP relay
5.1.10 display dhcp-server interface vlan-interface
Syntax
display dhcp-server interface vlan-interface vlan-id
View
Any view
Parameter
vlan-id: VLAN interface ID.
Description
Using display dhcp-server interface vlan-interface command, you can view the
information of the DHCP Server group corresponding to VLAN interface.
For the related command, see dhcp-server, display dhcp-server, debugging
dhcp-relay.
Example
# View the information of the DHCP Server group corresponding to VLAN-Interface 2.
<Quidway> display dhcp-server interface vlan-interface 2
The DHCP Server group of this interface is 0
The information shown above indicates that vlan-interface 2 is configured with a
DHCP Server group with ID as 0.