Huawei Quidway S6500 Series - Timers; Traffic-Share-Across-Interface

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 2 RIP Configuration Commands
Huawei Technologies Proprietary
2-19
[Quidway] rip
[Quidway-rip] undo summary
2.1.23 timers
Syntax
timers { update update-timer-length | timeout timeout-timer-length } *
undo timers { update | timeout } *
View
RIP view
Parameter
update-timer-length: Value of the Period update timer, ranging from 1 to 3600 seconds.
By default, it is 30 seconds.
timeout-timer-length: Value of the Timeout timer, ranging from 1 to 3600 seconds. By
default, it is 180 seconds.
Description
Using the timers command, you can modify the values of the three RIP timers: Period
Update, Timeout, and Garbage-collection. Using the undo timers command, you can
restore the default settings.
By default, the values of Period Update, Timeout, and Garbage-collection timers are 30
seconds, 180 seconds, and 120 seconds respectively.
Generally, it is regarded that the value of Garbage-collection timer is fixed to 4 times of
that of Period Update timer. Adjusting Period Update timer will affect
Garbage-collection timer.
The modification of RIP timers is validated immediately.
For related commands, see display rip.
Example
# Set the values of Period Update timer and Timeout timer of RIP to 10 seconds and 30
seconds respectively.
[Quidway] rip
[Quidway-rip] timers update 10 timeout 30
2.1.24 traffic-share-across-interface
Syntax
traffic-share-across-interface