Huawei Quidway S6500 Series - Reset Lacp Statistics

Command Manual - Port
Quidway S6500 Series Ethernet Switches Chapter 2 Link Aggregation Configuration Commands
Huawei Technologies Proprietary
2-11
undo port link-aggregation group
View
Ethernet port view
Parameter
agg-id: Aggregation group ID, in the range of 1 to 384.
Description
Using port link-aggregation group command, you can add an Ethernet port into a
manual or static aggregation group. Using undo port link-aggregation group
command, you can delete an Ethernet port from a manual or static aggregation group.
For the related command, see display link-aggregation verbose.
Example
# Add Ethernet1/0/1 into aggregation group 22.
[Quidway-Ethernet1/0/1] port link-aggregation group 22
2.1.16 reset lacp statistics
Syntax
reset lacp statistics [ interface { interface-type interface-number | interface-name }
[ to { interface-type interface-num | interface-name } ] ]
View
User view
Parameter
interface { interface_type interface_ num | interface_name } [ to { interface_type
interface_ num | interface_name } ]: Specifies ports. You can specify multiple sequential
ports with the to parameter, instead of specifying only one port. interface_name
specifies port name, in the format of interface_name = interface_type interface_num.
interface_type specifies port type and interface_num port number. For more
information, see the parameter item for the interface command.
Description
Using reset lacp statistics command, you can clear LACP statistics at a designated
port. If no port is specified, then LACP statistics at all ports shall be cleared.
For the related command, see display link-aggregation interface.