Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 6 IP Routing Policy Configuration Commands
Huawei Technologies Proprietary
6-7
[Quidway-route-policy] apply origin igp
6.1.9 apply tag
Syntax
apply tag value
undo apply tag
View
Route policy view
Parameter
value: Specifies the tag value of route information.
Description
Using apply tag command, you can configure to set the tag area of OSPF route
information. This command is one of attribute apply sub-statements of Route-policy.
Using undo apply tag command, you can cancel the apply sub-statement.
For the related commands, see if-match interface, if-match acl, if-match ip-prefix,
if-match ip next-hop, if-match cost, if-match tag, route-policy, apply ip next-hop,
apply local-preference, apply cost and apply origin.
Example
# Define one apply sub-statement. When it is used for setting route information attribute,
it sets the tag area of route information as 100.
[Quidway-route-policy] apply tag 100
6.1.10 display ip ip-prefix
Syntax
display ip ip-prefix [ ip-prefix-name ]
View
Any view
Parameter
ip-prefix-name: Specifies displayed address prefix list name. The length of
ip-prefix-name ranges from 1 to 19 character string.
Description
Using display ip ip-prefix command, you can view the address prefix list.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English