Huawei Quidway S6500 Series Command Manual

Command Manual - Port
Quidway S6500 Series Ethernet Switches Chapter 2 Link Aggregation Configuration Commands
Huawei Technologies Proprietary
2-6
Description
Using display link-aggregation interface command, you can view detailed link
aggregation information at a designated port, including aggregation group ID for the
port, port priority, operation key, LACP state flag, partner information (system ID, port
number, port priority, operation key, LACP state flag, LACP packet statistics).
Note that since the manual aggregation group cannot get the information of the peer
end, every item of the peer end is displayed as 0, which does not indicate the actual
state of the peer system.
Example
# Display detailed link aggregation information of manual link aggregation group.
<Quidway> display link-aggregation interface ethernet1/0/1
Ethernet1/0/1:
Attached AggID: 1
Local:
Port-Priority: 32768, Oper key: 1, Flag: 0x00
Remote:
System ID: 0x0, 0000-0000-0000
Port Number: 0, Port-Priority: 0, Oper-key: 0, Flag: 0x00
# Display detailed link aggregation information of static or dynamic link aggregation
group.
<Quidway> display link-aggregation interface ethernet1/0/1
Ethernet1/0/1:
Attached AggID: 20
Local:
Port-Priority: 32768, Oper key: 2, Flag: 0x3d
Remote:
System ID: 0x8000, 000e-84a6-fb00
Port Number: 2, Port-Priority: 32768 , Oper-key: 10, Flag: 0x3d
Received LACP Packets: 8 packet(s), Illegal: 0 packet(s)
Sent LACP Packets: 9 packet(s)
2.1.8 display lacp system-id
Syntax
display lacp system-id
View
Any view

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English