Huawei Quidway S6500 Series Command Manual

Command Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches Chapter 5 PIM Configuration Commands
Huawei Technologies Proprietary
5-14
Example
# Enable PIM-DM on VLAN-interface10 of the Ethernet switch.
[Quidway] multicast routing-enable
[Quidway-Vlan-interface10] pim dm
5.1.16 pim neighbor-limit
Syntax
pim neighbor-limit limit
undo pim neighbor-limit
View
Interface view
Parameter
limit: Limits of PIM neighbors on the interface, in the range of 0~128.
Description
Using pim neighbor-limit command, you can limit the PIM neighbors on an interface.
No neighbor can be added any more when the limit is reached. Using undo pim
neighbor-limit command, you can restore the default setting.
By default, the PIM neighbors on the interface are limited to 128.
If the existing PIM neighbors exceed the configured value during configuration, they will
not be deleted.
Example
# Limit the PIM neighbors on the Vlan-interface10 to 50.
[Quidway-Vlan-interface10] pim neighbor-limit 50
5.1.17 pim neighbor-policy
Syntax
pim neighbor-policy acl-number
undo pim neighbor-policy
View
Interface view
Parameter
acl-number: Basic ACL number, in the range of 2000 to 2999.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English