Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 4 Integrated IS-IS Configuration Commands
Huawei Technologies Proprietary
4-6
lsp-max-age: 1200
lsp-refresh: 900
interval between SPFs: level-1 10
level-2 10
4.1.6 display isis interface
Syntax
display isis interface [ verbose ]
View
Any view
Parameter
verbose: If this parameter is used, the details of the interface will be displayed.
Description
Using display isis interface command, you can view the information of the enabled
IS-IS interface.
This command displays the information of the enabled IS-IS interface, including
interface name, IP address of the interface, link state of the interface and so on.
Besides displaying all the information shown by the display isis interface command,
the display isis interface verbose command displays such information about the
IS-IS parameters of the interface as CSNP packet broadcast interval, Hello packet
broadcast interval and invalid number of Hello packet.
Example
# Display the information about the enabled IS-IS interface.
<Quidway> display isis interface
Interface IP Address Id Link.Sta IP.Sta MTU Type DIS
Vlan-interface1 172.16.1.2 001 Up Up 1497 L1 Yes
# Display the details of the IS-IS enabled interface.
<Quidway> display isis interface verbose
Interface IP Address Id Link.Sta IP.Sta MTU Type DIS
Vlan-interface1 172.16.1.2 001 Up Up 1497 L1 Yes
Secondary IP Address :
SNPA Address : 00e0.fc44.5f71
Csnp Interval : L1 10 L2 10
Hello Interval : L1 10 L2 10
Hold Time : L1 30 L2 30
Lsp Interval : 33

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English