Huawei Quidway S6500 Series - Lacp System-Priority

Command Manual - Port
Quidway S6500 Series Ethernet Switches Chapter 2 Link Aggregation Configuration Commands
Huawei Technologies Proprietary
2-8
View
Ethernet port view
Parameter
port-priority-value: Port priority, ranging from 0 to 65535. By default, it is 32768.
Description
Using lacp port-priority command, you can configure port priority value. Using undo
lacp port-priority command, you can restore the default value.
For the related commands, see display link-aggregation verbose and display
link-aggregation interface.
Example
# Set port priority as 64.
[Quidway-Ethernet1/0/1] lacp port-priority 64
2.1.11 lacp system-priority
Syntax
lacp system-priority system-priority-value
undo lacp system-priority
View
System view
Parameter
system-priority-value: System priority, ranging from 0 to 65535. By default, it is 32768.
Description
Using lacp system-priority command, you can configure system priority value. Using
undo lacp system-priority command, you can restore the default value.
For the related command, see display lacp system-id.
Example
# Set system priority as 64.
[Quidway] lacp system-priority 64