Huawei Quidway S6500 Series Command Manual

Command Manual - Network Protocol
Quidway S6500 Series Ethernet Switches Chapter 7 IPX Configuration Commands
Huawei Technologies Proprietary
7-5
Description
Using the display ipx service-table command, you can view the contents of the IPX
server information table.
Example
# Display the contents of the IPX server information table.
[Quidway] display ipx service-table
Abbreviation: S - Static, Pref - Preference(Decimal), NetId - Network number,
NodeId - Node address, hop - Hops(Decimal), Recv-If - Interface from which
the service is received
Number of Static Entries: 2
Number of Dynamic Entries: 0
Name Type NetId
S Prn1 0005 000d
S Prn2 0005 0008
# Display the details about the IPX server information table.
[Quidway] display ipx service-table verbose
Abbreviation: S - Static, Pref - Preference(Decimal), NetId - Network number,
NodeId - Node address, hop - Hops(Decimal), Recv-If - Interface from which
the service is received
Number of Static Entries: 2
Number of Dynamic Entries: 0
Name Type NetId NodeId Sock Pref Hops Recv-If
S Prn1 0005 000d 000a-000a-000a 0452 500 02 Vlan-interface1
S Prn2 0005 0008 000a-000a-000a 0452 500 03 Vlan-interface1
7.1.4 display ipx statistics
Syntax
display ipx statistics
View
Any view
Parameter
None
Description
Using the display ipx statistics command, you can view the IPX packet statistics.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English