Huawei Quidway S6500 Series Command Manual

Command Manual - Reliability
Quidway S6500 Series Ethernet Switches Chapter 2 HA Configuration Commands
Huawei Technologies Proprietary
2-2
View
System view
Parameter
None
Description
Use slave auto-update config command to enable the automatic synchronous switch
between the master/slave systems.
Use the undo slave auto-update config command to disable the automatic
synchronous switch.
By default, the automatic synchronous switch is enabled.
For the related command, see slave update config.
Example
# Enable automatic synchronous switch between master/slave systems.
[Quidway] slave auto-update config
2.1.3 slave restart
Syntax
slave restart
View
User view
Parameter
None
Description
Use the slave restart command to restart the slave board.
When the application of the backup system operates unmorally and requires for
reloading the applications, you can use this command to restart the slave board.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English