Huawei Quidway S6500 Series Command Manual

Command Manual - Reliability
Quidway S6500 Series Ethernet Switches Chapter 1 VRRP Configuration Commands
Huawei Technologies Proprietary
1-8
1.1.8 vrrp vrid priority
Syntax
vrrp vrid virtual-router-ID priority priority
undo vrrp vrid virtual-router-ID priority
View
VLAN interface view
Parameter
virtual-router-ID: VRRP virtual router ID, ranging from 1 to 255.
priority: Priority value, ranging from 1 to 254; By default, the priority value is 100.
Description
Use the vrrp vrid priority command to configure the virtual router priority.
Use undo vrrp vrid priority command to clear the virtual router priority.
The priority decides the status of a switch in the virtual router. A higher-priority switch is
more likely to be a master. Priority 0 is reserved for some special purpose. The value
255 is reserved for the IP address owner. The priority of the IP address owner is always
255 and cannot be modified.
Example
# Set the virtual router priority on VLAN-interface2 to 120.
[Quidway-vlan-interface2] vrrp vrid 1 priority 120
1.1.9 vrrp vrid timer
Syntax
vrrp vrid virtual-router-ID timer advertise adver-interval
undo vrrp vrid virtual-router-ID timer advertise
View
VLAN interface view

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English