Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-21
Item Description
Origin attribute of route, which indicates that the route updates its
origin relative to the route originating it from AS. It has three optional
values:
IGP
The route belongs to inside of AS. BGP treats aggregate
route and the route defined by the command network as
inside of AS, and origin type as IGP.
EGP The route is learned from exterior gateway protocol (EGP).
Origin
INC
Short for INCOMPLETE: indicates that the original source of
the route information is unknown (learned by other methods).
BGP sets the origin of the route imported through other IGP
protocols as INCOMPLETE
As-path
AS-path attribute of route, which records all AS areas that the route
passes. With it, route loop can be avoided
5.1.21 display bgp routing-table different-origin-as
Syntax
display bgp routing-table different-origin-as
View
Any view
Parameter
None
Description
Using display bgp routing-table different-origin-as command, you can view routes
that have different source autonomous systems
Example
# View the routes that have different source ASs.
<Quidway> display bgp routing-table different-origin-as
Flags: # - valid ^ - active I - internal
D - damped H - history S - aggregate suppressed
B - balance
Destination/Mask Pref Next-hop Med Local-Pref Origin As-Path
------------------------------------------------------------------
10.10.10.0/24 0 10.10.10.2 0 IGP
10.10.10.0/24 256 10.10.10.1 0 IGP 200

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English