Huawei Quidway S6500 Series - Rmon Alarm

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 6 RMON Configuration Commands
Huawei Technologies Proprietary
6-8
Table 6-6 Output description of the display rmon statistics command
Field Description
Statistics entry 3 Index number in statistics table
owned by abc Creator of the entry.
VALID The entry corresponding to the index is valid
Interface The sampled port.
etherStatsOctets Received/Sent octets
etherStatsPkts Received/Sent packets
etherStatsBroadcastPkts Number of broadcast packets
etherStatsMulticastPkts Number of multicast packets
etherStatsUndersizePkts Number of undersized packets
etherStatsOversizePkts Number of oversized packets
etherStatsFragments Number of undersized and CRC error packets
etherStatsJabbers Number of oversized and CRC error packets
etherStatsCRCAlignErrors Number of CRC error packets
etherStatsCollisions Number of collision packets
etherStatsDropEvents
(insufficient resources)
Dropping packet events
Packets received according to
length
The number of packets calculated by the bytes
length.
6.1.7 rmon alarm
Syntax
rmon alarm entry-number alarm-variable interval { delta | absolute } rising-threshold
threshold-value1 event-entry1 falling-threshold threshold-value2 event-entry2
[ owner text ]
undo rmon alarm entry-number
View
System view
Parameter
entry-number: Number of the entry to be added/deleted, ranging from 1 to 65535.
alarm-variable: Specifies the alarm variable with a character string, ranging from 1 to
256, in the OID dotted format, like 1.3.6.1.2.1.2.1.10.1 (or ifInOctets.1).