Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-12
3.1.15 display ospf asbr-summary
Syntax
display ospf [ process-id ] asbr-summary [ ip-address mask ]
View
Any view
Parameter
process-id: Process ID of OSPF, ranging from 1 to 65535. The command is applied to
all current OSPF processes if you do not specify a process ID.
ip-address: Matched IP address in dotted decimal format.
mask: IP address mask in dotted decimal format.
Description
Using display ospf asbr-summary command, you can view the summary information
of OSPF imported route.
If the parameters are not set, the summary information of all OSPF imported routes will
be displayed.
For the related commands, see asbr-summary .
Example
# Display the summary information of all OSPF imported routes.
<Quidway> display ospf asbr-summary
OSPF Process 1 with Router ID 1.1.1.1
Summary Addresses
Total summary address count: 2
Summary Address
net : 168.10.0.0
mask : 255.254.0.0
tag : 1
status : Advertise
The Count of Route is 0
Summary Address
net : 1.1.0.0
mask : 255.255.0.0
tag : 100
status : DoNotAdvertise
The Count of Route is 0

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English