Huawei Quidway S6500 Series - Chapter 2 MAC Address Table Management Commands; Bridgemactocpu; MAC Address Table Management Commands

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 2 MAC Address Table Management Commands
Huawei Technologies Proprietary
2-1
Chapter 2 MAC Address Table Management
Commands
2.1 MAC Address Table Management Commands
2.1.1 bridgemactocpu
Syntax
bridgemactocpu { enable | disable }
View
System view
Parameter
enable: Configure the packets to be passed to CPU for being processed.
disable: Configure the packets not to be passed to CPU for being processed.
Description
Using bridgemactocpu command, you can configure whether or not the packets with
destination MAC addresses being bridge MAC address of the switch are passed to
CPU for being processed.
By default, the packets with destination MAC addresses being bridge MAC address are
not to be passed to CPU for being processed.
Example
# Configure the packets with destination MAC addresses being bridge MAC address to
be passed to CPU for being processed.
[Quidway] bridgemactocpu enable
2.1.2 display mac-address aging-time
Syntax
display mac-address aging-time
View
Any view