Huawei Quidway S6500 Series - Debugging; Delete

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-28
Parameter
none
Description
Using close command, user can disconnect FTP client side from FTP server side
without exiting FTP client side view. That is to say, you can terminate the control
connection and data connection with the remote FTP Server at the same time.
Related command: open.
Example
# Terminate connection with the remote FTP Server and stays in FTP Client view.
[ftp] close
221 Server closing.
[ftp]
1.4.7 debugging
Syntax
debugging
View
FTP Client view
Parameter
none
Description
Using debugging command, you can enable the system debugging functions.
Example
# Enable the system debugging functions.
[ftp] debugging
Debug is on.
1.4.8 delete
Syntax
delete remotefile