Huawei Quidway S6500 Series - Peer As-Number; Peer As-Path-Acl Export

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-32
Description
Using peer allow-as-loop command, you can configure the repeating time of local AS.
Using undo peer allow-as-loop command, you can remove the repeating time of local
AS.
For the related commands, see display current-configuration, display bgp
routing-table peer, display bgp routing-table group
Example
# Specify to configure the repeating times of local AS to 2.
[Quidway-bgp] peer 1.1.1.1 allow-as-loop 2
5.1.35 peer as-number
Syntax
peer group-name as-number as-number
undo peer group-name as-number
View
BGP view
Parameter
group-name: Name of peer group.
as-number: The AS number of the peer/peer group, the range is 1 to 65535.
Description
Using peer as-number command, you can configure the AS number of peer group.
Using undo peer as-number command, you can delete the AS number of peer group.
By default, no AS number of peer group is configured.
Example
# Specify the peer AS number for the peer test as 100.
[Quidway-bgp] peer test as-number 100
5.1.36 peer as-path-acl export
Syntax
peer group-name as-path-acl acl-number export
undo peer group-name as-path-acl acl-number export