Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-46
identified by different protocols, the protocol with a high preference will play a decisive
role.
Example
# Specify the preference of an imported external route of the AS as 160.
[Quidway-ospf-1] preference ase 160
3.1.46 reset ospf
Syntax
reset ospf [ statistics ] { all | process-id }
View
User view
Parameter
statistics: Reset OSPF statistics.
all: Reset all OSPF processes.
process-id: Process ID of OSPF, ranging from 1 to 65535.
Description
Using reset ospf all command, you can reset all the OSPF process.
Using reset ospf process-id command, you can reset the corresponding OSPF
process
This command can be used to reset the OSPF process and the following results are
expected:
z Clear invalid LSA immediately without waiting for LSA timeout.
z If the Router ID changes, a new Router ID will take effect by executing the
command.
z Re-elect DR and BDR conveniently.
z OSPF configuration before the restart will not lose.
The system will require the user to confirm whether to re-enable the OSPF protocol
after execution of the command.
Example
# Reset all the OSPF processes.
<Quidway> reset ospf all

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English