Huawei Quidway S6500 Series Command Manual

Command Manual - VLAN
Quidway S6500 Series Ethernet Switches Chapter 1 VLAN Configuration Commands
Huawei Technologies Proprietary
1-4
Parameter
vlan-id: Display information of specified VLAN.
all: Display information of all VLANs.
static: Display information of VLAN created statically by the system.
dynamic: Display information of VLAN created dynamically by the system.
Description
Using display vlan command, you can view related information about the specified or
all VLANs.
If vlan-id or all is specified, information of specified VLAN or all VLANs is displayed. It
includes: VLAN ID, VLAN type, whether the routing function has been enable on this
VLAN (i.e. whether the route interface exists. If it exists, display primary IP address and
mask), VLAN description, the broadcast suppression ratio, and the ports VLAN
contains.
If parameter is not specified, information of the VLAN that has been created is
displayed. If the parameter dynamic or static is selected, information of VLAN created
dynamically or statically by the system is displayed.
For the related command, see vlan.
Example
# Display the information about VLAN1.
[Quidway] display vlan 1
VLAN ID: 1
VLAN Type: static
Route interface: not configured
Description: VLAN 0001
Name: hello
Broadcast MAX-ratio: 100%
Tagged Ports: none
Untagged Ports:
Ethernet1/0/1 Ethernet1/0/2 Ethernet1/0/3
1.1.5 interface vlan-interface
Syntax
interface vlan-interface vlan-id
undo interface vlan-interface vlan-id
View
System view

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English