Huawei Quidway S6500 Series Command Manual

Command Manual - VLAN
Quidway S6500 Series Ethernet Switches Chapter 1 VLAN Configuration Commands
Huawei Technologies Proprietary
1-2
Table 1-1 Relationship Between Broadcast Suppression Mode and LPU Type
Broadcast Suppression
Mode
Type A LPU (LS81FT48A/
LS81FM24A/LS81FS24A/LS8
1GB8UA/LS81GT8UA)
LPUs excluding the
type A LPUs
VLAN pps Suppression
Mode
Supported Unsupported
VLAN Bandwidth Radio
Suppression Mode
Supported Unsupported
The configuration of the suppression mode on the VLAN will overwrite the previously
configured mode.
Example
# Set the broadcast suppression ratio for the current VLAN1 to 50%.
[Quidway-vlan1] broadcast-suppression 50
1.1.2 description
Syntax
description { string | text }
undo description
View
VLAN view, VLAN interface view
Parameter
string: Description character string of current VLAN. It ranges from 1 to 32 characters.
The default description character string of current VLAN is VLAN ID of the VLAN, e.g.
VLAN 0001.
text: Description character text of current VLAN interface. It ranges from 1 to 80
characters. The default description character string of VLAN interface is the interface
name, e.g. Vlan-interface1 Interface.
Description
Using description command, you can configure a description for the current VLAN or
VLAN interface. Using undo description command, you can restore the default
description of current VLAN or VLAN interface.
For the related command, see display vlan, display interface vlan-interface.
Example
# Specify a description character string “RESEARCH” for current VLAN.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English