Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 4 System Maintenance Commands
Huawei Technologies Proprietary
4-14
Description
Using display info-center command, you can view the configuration of system log and
the information recorded in the memory buffer.
If the information in the current log/trap buffer is less than the specified sizeval, display
the actual log/trap information.
For the related commands, see info-center enable,info-center loghost,info-center
logbuffer,info-center console channel,info-center monitor channel.
Example
# Show the system log information.
<Quidway> display info-center
Information Center:enabled
Log host:
173.168.1.10, channel number:2, channel name:loghost,
language:english , host facility local:7
Console:
channel number:0, channel name:console
Monitor:
channel number:1, channel name:monitor
SNMP Agent:
channel number:5, channel name:snmpagent
Log buffer:
enabled, max buffer size:1024, current buffer size:256
current messages:6, channel number:4, channel name:logbuffer
dropped messages:0, overwritten messages:0
Trap buffer:
enabled, max buffer size:1024, current buffer size:256
current messages:0, channel number:3, channel name:trapbuffer
dropped messages:0, overwritten messages:0
Information timestamp setting:
log - date, trap - date, debug - boot
4.5.3 display logbuffer
Syntax
display logbuffer [ level severity | size buffersize ]* [ | { begin | exclude | include }
regular-expression ]
View
Any view