Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 3 Device Management Commands
Huawei Technologies Proprietary
3-2
Note:
S6506R supports master board and slave board. The two boards both have file system.
User can operate the file on the two boards. In the case user designate the APP
adopted on slave board next time, the file directory or URL should be started with
“slot[No.]#flash:”, the [No.] is the slave board number. For example, suppose slot 1 is
slave board, “text.txt” file URL on slave board should be “slot1#flash:/text.txt”.
Example
# Specify the APP application used for primary boot of next time.
<Quidway> boot boot-loader primary PLATV100R002B09D002.APP slot 0
The specifed file will be booted next time!
<Quidway>
3.1.2 boot bootrom
Syntax
boot bootrom file-url slot slot-num-list
View
User view
Parameter
file-url:path and name of Bootrom file.
slot-num-list: slot-num-list = [ slot-num1 [ to slot-num2 ] ]&<1-10>, slot need to be
upgraded, the range of slot-num is from 0 to 6. &<1-10> indicates that parameter in
front of this mark can be input up to 10 times.
Description
Using boot bootrom command, you can upgrade bootrom.
To Next Page
Loading...
