Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-49
Example
# Refresh all BGP routes.
<Quidway>refresh bgp all
5.1.60 reset bgp
Syntax
reset bgp { all | peer-address [ flap-info ] }
View
User view
Parameter
peer-address: Reset connection with a specified BGP peer.
all: Reset all the connections with BGP.
flap-info: Reset the flap-info of a record at this peer address.
Description
Using reset bgp peer-address command, you can reset the connection of BGP with a
specified BGP peer.
Using reset bgp all command, you can reset all the connections with BGP.
Example
# Reset all the BGP connections to enable the new configuration (after configuring the
new Keepalive interval and Holdtime interval using the timer command).
<Quidway>reset bgp all
5.1.61 reset bgp dampening
Syntax
reset bgp dampening [ network-address [ mask ] ]
View
User view
Parameter
network-address: Network IP address related to the clearing attenuation information.
mask: Network mask.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English