Huawei Quidway S6500 Series Command Manual

Command Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches Chapter 5 PIM Configuration Commands
Huawei Technologies Proprietary
5-13
undo pim bsr-boundary
View
Interface view
Parameter
None
Description
Using pim bsr-boundary command, you can configure an interface to be the PIM
domain border. Using undo pim bsr-boundary command, you can remove the border.
You can use this command to set border of bootstraps messages, that is to say,
bootstrap messages cannot pass interfaces that are configured with pim
bsr-boundary command while other PIM messages can. In this way, the network is
divided into different BSR domains.
By default, no domain border is set.
For the related command, see c-bsr.
Example
# Configure domain border on VLAN-interface10.
[Quidway-Vlan-interface10] pim bsr-boundary
5.1.15 pim dm
Syntax
pim dm
undo pim dm
View
Interface view
Parameter
None
Description
Using pim dm command, you can enable PIM-DM. Using undo pim dm command,
you can disable PIM-DM.
By default, PIM-DM is disabled.
Once enabled PIM-DM on an interface, PIM-SM cannot be enabled on the same
interface and vice versa.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English