Command Manual - Port
Quidway S6500 Series Ethernet Switches Chapter 1 Ethernet Port Configuration Commands
Huawei Technologies Proprietary
1-17
View
Ethernet port view
Parameter
vlan_id_list: vlan_id_list = [ vlan_id1 [ to vlan_id2 ] ]&<1-10> specifies which VLAN the
hybrid port will be added to. It can be discrete. The vlan_id ranges from 1 to 4094.
&<1-10> indicates that the former parameter can be input 10 times repeatedly at most.
tagged: The packet of specified VLAN will have tag.
untagged: The packet of specified VLAN will not have tag.
Description
Using port hybrid vlan command, you can join the hybrid port to specified existing
VLAN. Using undo port hybrid vlan command, you can cancel the hybrid port from
the specified VLAN.
Hybrid port can belong to multiple VLANs. If the port hybrid vlan vlan_id_list { tagged
| untagged } command is used for many times, the VLANs carried by the hybrid port is
the set of vlan_id_list.
This command can be used on condition that the VLAN specified with vlan_id must
have been existed.
For the related command, see port link-type.
Example
# Join hybrid port Ethernet1/0/1 to VLAN of 2, 4 and 50-100, and these VLAN will have
tags.
[Quidway-Ethernet1/0/1] port hybrid vlan 2 4 50 to 100 tagged
1.1.20 port link-type
Syntax
port link-type { access | hybrid | trunk }
undo port link-type
View
Ethernet port view
Parameter
access: Configure the port as access port.
hybrid: Configure the port as hybrid port.
trunk: Configure the port as trunk port
To Next Page
Loading...
Need help?
General
