Huawei Quidway S6500 Series Command Manual

Command Manual - VLAN
Quidway S6500 Series Ethernet Switches Chapter 2 GARP/GVRP Configuration Commands
Huawei Technologies Proprietary
2-7
Description
Using gvrp command, you can enable GVRP. Using undo gvrp command, you can
restore the GVRP to default mode, i.e. disable GVRP.
By default, GVRP is disabled.
This command can be used to enable/disable global GVRP in System view or
enable/disable port GVRP in Ethernet port view.
Before enabling port GVRP, the user must enable global GVRP first and port GVRP
must be enabled/disabled on Trunk port.
For the related commands, see display gvrp status.
Example
# Enable global GVRP.
[Quidway] gvrp
2.2.4 gvrp registration
Syntax
gvrp registration { fixed | forbidden | normal }
undo gvrp registration
View
Ethernet port view
Parameter
fixed: Enable to create or register VLAN on the port manually and disable to register or
deregister VLAN dynamically.
forbidden: Deregisters all VLANs except VLAN 1 and disables to create or register any
other VLAN on the port.
normal: Enable to create, register and deregister VLAN on the port manually or
dynamically.
Description
Using gvrp registration command, you can configure GVRP registration type. Using
undo gvrp registration command, you can restore the default type.
By default, the registration type is normal.
This command can be only used on Trunk port.
For the related commands, see display gvrp statistics.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English