Huawei Quidway S6500 Series Command Manual

Command Manual - VLAN
Quidway S6500 Series Ethernet Switches Chapter 1 VLAN Configuration Commands
Huawei Technologies Proprietary
1-6
View
VLAN interface view
Parameter
none
Description
Using shutdown command, you can disable the VLAN interface. Using undo
shutdown command, you can enable the VLAN interface.
By default, when all Ethernet ports are in DOWN status in VLAN interface, the VLAN
interface is in DOWN status, i.e. disabled status. When there is one or more Ethernet
ports in VLAN interface are in UP status, the VLAN interface is UP.
This command can be used to start interface after the related parameters and protocols
of VLAN interface are set well. Or when the VLAN interface fails, the interface can be
shut down first and then restarted, in this way, the interface may be restored to normal
status. Shutting down or starting VLAN interface will not take any effect on any Ethernet
port of this VLAN.
Example
# Restart interface after shutting down the interface.
[Quidway-Vlan-interface1] shutdown
[Quidway-Vlan-interface1] undo shutdown
1.1.8 vlan
Syntax
vlan vlan-id
undo vlan { vlan-id [ to vlan-id ] | all }
View
System view
Parameter
vlan-id: Specifies the ID of a VLAN to be created and/or entered, ranging from 1 to
4094.
all: Delete all VLANs.
Description
Using vlan command, you can enter VLAN view. If the specified VLAN is not created,
create it first. Using undo vlan command, you can cancel the specified VLAN.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English