Huawei Quidway S6500 Series Command Manual

Command Manual - VLAN
Quidway S6500 Series Ethernet Switches Chapter 1 VLAN Configuration Commands
Huawei Technologies Proprietary
1-3
[Quidway-vlan1] description RESEARCH
1.1.3 display interface vlan-interface
Syntax
display interface vlan-interface [ vlan-id ]
View
Any view
Parameter
vlan-id: ID of VLAN interface, ranging from 1 to 4094.
Description
Using display interface vlan-interface command, you can view the related
information about specified or all VLAN interfaces such as physical status and link
status of VLAN interface, Ethernet frame format, MAC address, IP address and sub-net
mask, description character string and MTU, etc.
With vlan-id specified, only the information about the specified VLAN interface will be
displayed. If no vlan-id is specified, the information about all the existing VLAN
interfaces will be displayed.
For the related command, see interface vlan-interface.
Example
# Display related information about VLAN-interface 1.
<Quidway> display interface vlan-interface 1
Vlan-interface1 current state : DOWN
Line protocol current state : DOWN
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is
00e0-fc07-4101
Internet Address is 10.1.1.1/24 Primary
Description : HUAWEI, Quidway Series, Vlan-interface1 Interface
The Maximum Transmit Unit is 1500
1.1.4 display vlan
Syntax
display vlan [ vlan-id [ to vlan-id ] | all | static | dynamic ]
View
Any view

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English