Command Manual - Security
Quidway S6500 Series Ethernet Switches Chapter 2 AAA Configuration Commands
Huawei Technologies Proprietary
2-6
<Quidway> display domain
0 Domain = system
State = Active
Scheme = LOCAL Access-limit = Disable
Vlan-assignment-mode = Integer
Domain User Template:
Idle-cut = Disable
Self-service = Disable
Messenger Time = Disable
Default Domain Name: system
Total 1 domain(s).1 listed.
2.1.6 display local-user
Syntax
display local-user [ domain isp-name | idle-cut { enable | disable } | service-type
{ telnet | ftp | ssh | terminal | lan-access } | state { active | block } | user-name
user-name | vlan vlanid ]
View
Any view
Parameter
domain isp-name: Configures to display all the local users in the specified ISP domain.
isp-name specifies the ISP domain name with a character string not exceeding 24
characters. The specified ISP domain shall have been created.
idle-cut: Configures to display the local users according to the state of idle-cut function.
disable means that the user disables the idle-cut function and enable means the user
enables the function. This parameter only takes effect on the users configured as
lan-access type. For other types of users, the display local-user idle-cut enable and
display local-user idle-cut disable commands will not display any information.
service-type: Configures to display local user of a specified type. telnet means that:
the specified user type is telnet. ftp means that: the specified user type is ftp.
lan-access means that the specified user type is lan-access which mainly refers to
Ethernet accessing users, 802.1x supplicants for example. terminal means the
specified user type is terminal which refers to users who use the terminal service (login
from the Console port).
state { active | block } Configures to display the local users in the specified state.
active means that the system allows the user requesting network service and block
means the system does not allow the user requesting network service.
To Next Page
Loading...
Need help?
General
