Huawei Quidway S6500 Series - Snmp-Agent Group

Command Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches
Chapter 3 ACL Control Commands to
Control Login Users
Huawei Technologies Proprietary
3-3
[Quidway] snmp-agent community read huawei acl 2000
3.1.3 snmp-agent group
Syntax
snmp-agent group { v1 | v2c } group-name [ read-view read-view ] [ write-view
write-view ] [ notify-view notify-view ] [ acl acl-number ]
undo snmp-agent group { v1 | v2c } group-name
snmp-agent group v3 group-name [ authentication | privacy ] [ read-view
read-view ] [ write-view write-view ] [ notify-view notify-view ] [ acl acl-number ]
undo snmp-agent group v3 group-name [ authentication | privacy ]
View
System view
Parameter
v1: V 1 security mode.
v2c: V 2 security mode.
v3: V 3 security mode.
group-name: Group name, ranging from 1 to 32 bytes.
authentication: With this parameter, the system will authenticate SNMP data without
encrypting it.
privacy: Authenticates and encrypts packets.
read-view: Sets read-only view.
read-view: The name of read-only view, ranging from 1 to 32 bytes.
write-view: Permits to set read-write view.
write-view: The name of read-write view, ranging from 1 to 32 bytes.
notify-view: Sets notify view.
notify-view: The name of notify view, ranging from 1 to 32 bytes.
acl acl-number: The number identifier of basic number-based ACLs, ranging from 2000
to 2999.