Huawei Quidway S6500 Series - Ipx Sap Mtu; Ipx Sap Multiplier

Command Manual - Network Protocol
Quidway S6500 Series Ethernet Switches Chapter 7 IPX Configuration Commands
Huawei Technologies Proprietary
7-16
7.1.20 ipx sap mtu
Syntax
ipx sap mtu bytes
undo ipx sap mtu
View
VLAN interface view
Parameter
bytes: The maximum SAP packet size in bytes. It is in the range 480 to 1500 and
defaults to 480.
Description
Using the ipx sap mtu command, you can configure the maximum size of SAP
update packets. Using the undo ipx sap mtu command, you can restore the default.
Example
# Set the maximum size of SAP update packets to 674 bytes, allowing 10 service
entries on VLAN interface 1.
[Quidway-Vlan-interface1] ipx sap mtu 674
7.1.21 ipx sap multiplier
Syntax
ipx sap multiplier multiplier
undo ipx sap multiplier
View
System view
Parameter
multiplier: A multiplier of the update interval, decides the aging period of the SAP
service entries together with the update interval. It is in the range 1 to 1000 and
defaults to 3. Multiplying the update interval by the multiplier, you can get the actual
aging period.
Description
Using the ipx sap multiplier command, you can configure the aging period of the
SAP service entries. Using the undo ipx sap multiplier command, you can restore
the default.