Huawei Quidway S6500 Series Command Manual

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 4 System Maintenance Commands
Huawei Technologies Proprietary
4-13
4.5 Log Commands
4.5.1 display channel
Syntax
display channel [ channel-number | channel-name ]
View
Any view
Parameter
channel-number: Channel number, ranging from 0 to 9, that is, the system has ten
channels.
channel-name: Specify the channel name. the name can be channel6, channel7,
channel8, channel9, console, logbuffer, loghost, monitor, snmpagent, trapbuffer.
Description
Using display channel command, you can view the details about the information
channel.
Without parameter, display channel command shows the configurations of all the
channels.
Example
# Show details about the information channel 0.
<Quidway> display channel 0
channel number:0, channel name:console
MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL
ffff0000 default Y warning Y debugging Y debugging
4.5.2 display info-center
Syntax
display info-center
View
Any view
Parameter
None

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English