Huawei Quidway S6500 Series - TFTP Configuration Commands; Tftp Get; Verbose

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-38
1.4.24 verbose
Syntax
verbose
undo verbose
View
FTP Client view
Parameter
none
Description
Using verbose command, you can enable verbose. Using undo verbose command,
you can disable verbose.
By default, verbose is enabled.
Example
# Enable verbose.
[ftp]verbose
1.5 TFTP Configuration Commands
1.5.1 tftp get
Syntax
tftp tftp-server get source-file [ dest-file ]
View
User view
Parameter
tftp-server: The IP address or hostname of the TFTP server. The name of the TFTP
server should be a string ranging from 1 to 20 characters.
source-file: Specify the filename of the source file on the TFTP server.
dest-file: Specify the filename of the destination file which will be saved on the switch.
Description
Using tftp get command, you can download a file from the specified directory of the
TFTP server and saving it on the switch.