Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 4 Integrated IS-IS Configuration Commands
Huawei Technologies Proprietary
4-10
6.6.6.6 Vlan-interface1001
I 0.0.0.0/0 10 7.7.7.7 Vlan-interface1000 R/-/-
6.6.6.6 Vlan-interface1001
D 7.7.7.0/25 10 Direct Vlan-interface1000 R/L/-
D 6.6.6.0/24 10 Direct Vlan-interface1001 R/L/-
I 10.1.1.0/24 10 7.7.7.7 Vlan-interface1000 R/-/-
6.6.6.6 Vlan-interface1001
4.1.11 display isis spf-log
Syntax
display isis spf-log
View
Any view
Parameter
none
Description
Using display isis spf-log command, you can view the SPF calculation log information
of the IS-IS. .
Example
# View the SPF calculation log of IS-IS.
<Quidway> display isis spf-log
Details of Level 1 SPF Run:
-------------------------------------------------------------------------
Trig.Event No.Of Nodes Duration(ms) StartTime
IS_SPFTRIG_LSPCHANGE 2 19 1:12:1
IS_SPFTRIG_LSPCHANGE 2 19 1:11:58
IS_SPFTRIG_LSPCHANGE 2 18 1:11:53
IS_SPFTRIG_CIRC_DOWN 2 19 1:11:46
IS_SPFTRIG_NEWADJ 2 20 1:11:39
IS_SPFTRIG_LSPCHANGE 2 19 1:11:35
IS_SPFTRIG_PERIODIC 3 18 1:3:25
IS_SPFTRIG_LSPCHANGE 2 22 0:55:51
IS_SPFTRIG_LSPCHANGE 2 18 0:55:46
IS_SPFTRIG_ADJDOWN 2 19 0:55:23
IS_SPFTRIG_NEWADJ 2 18 0:54:16
IS_SPFTRIG_LSPCHANGE 2 20 0:54:12
IS_SPFTRIG_LSPCHANGE 3 19 0:54:7
To Next Page
Loading...
